Pyro Industries Quest Plus Provozní pokyny stáhnout pdf (Strana 16)

Pre-lnstalla tion Assembly

After removing the packaging from the stove, lift the hopper lid, and remove all pre-packaged items that

were shipped in the hopper. Also open the stove door and remove all pre-packaged items.

Using a

711

socket or open end wrench, remove the two bolts from the bottom that secure the stove to

the wooden pallet.

If your stove is a freestanding model, remove the pedestal from

its

box and place it beside the stove. With

a helper,

lift

the stove onto

its

pedestal base. Put the three

114"

bolts through the holes in the mounting flange

of the pedestal and into the three threaded inserts in the stove bottom. Two of these are where the stove was

originally secured to the pallet. Tighten all three fasteners with a properly sized wrench or socket

(318").

If your stove is an insert model, refer to appendix

for shroud information

Remove

The

Two

Bolts

From

Under The Pallet

Attach Stove To Pedestal

By Inserting

Six

Bolts

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 39 40

Žádné komentáře

Pyro Industries Quest Plus Provozní pokyny Strana 16