Pyro Industries Advantage Plus Provozní pokyny stáhnout pdf (Strana 15)

1. After removing the packaging from the stove, lift the hopper lid, and remove all pre-packaged items that

were shipped in the hopper. Also open the stove door and remove all pre-packaged items.

2. Using a 7/16”socket or open end wrench, remove the two bolts from the bottom that secure the stove

to the wooden pallet.

3. If your stove is a freestanding model, remove the pedestal from its box and place it beside the stove .

With a helper, lift the stove onto its pedestal base. Put the six 1/4” bolts through the holes in the mounting

f l a n g e of the pedestal and into the six threaded inserts in the stove bottom. Two of these are where the

s t o v e was originally secured to the pallet. Tighten all six fasteners with a properly sized wrench or socke t

( 3 / 8 ” ) .

Pre-Installation Assembly

Remove The Two Bolts From

Under The Pallet

Attach Stove To Pedestal

By Inserting Six Bolts

Pedestal/Ash Pan Assembly

After stove body is secured to

pedestal install the sidepanel

attachment screws. Find 2 #8

screws in a small bag in the

accessory kit. Using a Phillips

screw driver install screw from

underneath the side panel at

the front edge.

3 4

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 36 37

Žádné komentáře

Pyro Industries Advantage Plus Provozní pokyny Strana 15